4 inch flat grind 440C stainless steel drop point hunter, 8 1/2 inches OAL, 3/16 inches thick, 1 1/8 inches wide in a Loveless design.  Mirror finish taper tang.  The knife has a brass guard and spacers, 1/8 inch mosaic pins and a nickel silver thong tube.  The handle has a “cracked ice” mammoth ivory…

3 1/2 inch guthook hunter/skinner made from 440C stainless steel, 7 1/2 inches OAL, 5/32 inches thick, 1 1/2 inches wide with a hollow grind and mirror finish.  It has brass bolsters, corby rivets, spacer, and thong tube.  Brick red liners and spacers.  The handle is black (with some streaking) buffalo horn and premium desert…

4 5/8 inch clip point hunter blade, 9 3/4 inches OAL, 1 3/8 inches wide, 5/32 inches thick made from ATS34 stainless steel, hollow grind with a mirror finish.  416 stainless guard and spacers, black buffalo horn spacer, and whitetail deer antler handle with a nickel silver butt cap.  The sheath is dyed russet color,…

5 1/8 inch slight upsweep hunter/skinner knife, 9 1/2 inches OAL, 1/8 inch thick, 3/4 inch wide made from ATS34 hollow ground stainless steel and mirror finished.  Nickel silver guard, spacer, corby rivets, and thong tube.  The handle is black buffalo horn with some streaking and has black fiber liners.  The partial pouch with a…

4 1/2 inch clip point Chute knife, 9 inches OAL, 1/8 inch thick, 1 1/4 inches wide made from ATS34 stainless steel.  Hollow grind with a 600 grit matte finish.  Nickel silver guard, spacer, and thong tube.  Figured Bubinga handle wood scales with two 3/16 inch mosaic pins.  The sheath is a tan dyed pouch…

4 3/8 inch stainless damascus in a raindrop pattern, clip point hunter.  240 layers, 5/32 inch thick, 1 1/4 inch wide, 10 1/4 inches OAL.  Nickel silver guard with a handle in the Scagel style:  nickel silver and black fiber spacers, 1/8 inch red micarta spacers, stabilized Maple burl spacer, and whitetail deer antler with…

7 1/4 inch clip point Bowie, 12 1/8 inches OAL, 3/16 inches thick, 1 1/2 inches wide made of ATS34 stainless steel with a mirror finish.  The single guard is 416 stainless steel with brass and nickel silver spacers, nickel silver corby rivets and thong tube.  Premium desert ironwood handle scales on a tapered and…

4 7/8 inch drop point hunter, 10 inches OAL, 1 1/4 inch wide, 5/32 inches thick ATS34 stainless steel.  Hollow grind with satin (1200 grit) grinds and mirror finish flats.  Nickel silver guard, spacers, and butt cap with Malachite stone spacer and elk antler tine handle.  The pouch sheath is dyed russet color and has…